ZHEJIANG JINXIANG PANEL INDUSTRY CO., LTD.

Indoor Aluminum Composite Panel Installation Method

Aluminum composite panel installation - on the Metope plywood
For the uneven and blank wall, you need to choose the aluminum composite panel ranging from 2 to 3mm. ,

Step 1: Use 9MM splint to make the whole wall;
Step 2: Cut the aluminum composite panel according to product size and collage pattern.
Step 3: Spray the universal glue evenly on the back of the wooden board and the aluminum composite panel with the spray gun;
Step 4: glue the aluminum composite panel one by one on the wooden board base according to the arrangement of the pattern.
Step 5: Use glass glue and aluminum trim strip to convergent edges;
Step 6: Remove protective film after adhesive bonding.

Aluminum composite panel installation - on the cement wall
For the relatively flat concrete wall or the original wall that has been done flat treatment, you need to choose aluminum composite panel ranging from 2 to 3mm thickness.

Step 1: Measure the wall dimensions, then make the aluminum composite panel according to the design drawing.
Step 2: Arrange the aluminum composite panel on the wall.
Step 3: Trim the edges of the aluminum composite panel with trimming knife, and be careful not to wear aluminum.
Step 4: Tighten the aluminum panel and aluminum alloy with the pull-down screw.
Step 5: Seal the edge with stainless steel or aluminum alloy.

Note: The aluminum composite panel can also be glued to the wall with structural glue or nailing glue, and decorated with decorative side strips.

Know the installation method, how about choosing a fashionable aluminum composite panel? Jinxiang - a professional aluminum composite panel supplier is able to meet all your needs. We offer you OEM aluminum composite panel Service which will give you a different color decorative board.
  • TEL:+86 0579 82228865
  • FAX:
  • EMAIL:aluconovo@163.com
  • ADDRESS:No.638, Qianxi Industrial Area, Wucheng District, Jinhua City, China